Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to ZOOM ZDM-1PMP Podcast Mic Pack, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
What is ZDM-1PMP Podcast Mic Pack?
The ZDM-1PMP is a microphone pack from ZOOM for podcasting. It bundles a dynamic microphone, closed-back headphones, a desktop mic stand, a windscreen and an XLR cable, covering everything except the recorder.
The microphone is the ZDM-1, a large-diaphragm dynamic with a supercardioid pattern that ZOOM says reduces unwanted sound pickup. It has a built-in shock mount to reduce handling and vibration noise.
The headphones are the closed-back ZHP-1 with 40 mm drivers, described as low in sound leakage. They suit monitoring your own voice and a guest's during recording.
The TPS-4 desktop stand is height-adjustable and folds into a lightweight tripod, so it can stand on a desk or travel with you. The official page lists recorders such as ZOOM's PodTrak series as related products.
Broadcast-style dynamic mic
The ZDM-1 is a large-diaphragm dynamic that ZOOM describes as capturing a rich, warm voice. Dynamic mics generally pick up less room sound, which may help in untreated rooms.
Supercardioid with built-in shock mount
The narrow supercardioid pattern focuses on sound from the front. The built-in shock mount helps reduce desk vibration and handling noise.
135 dB maximum SPL
The official spec lists a 135 dB maximum sound pressure level, which ZOOM presents as headroom against clipping and distortion on loud voices.
ZHP-1 closed-back headphones
These closed-back 40 mm headphones use a self-adjusting headband. A closed design leaks less into the mic, which suits monitoring while recording.
Portable TPS-4 desk stand
A metal screw and folding tripod make the stand light and sturdy. Its height adjusts, so it can be set up on a desk or on location.
Windscreen and 2 m XLR cable
A dedicated windscreen reduces breath and wind noise, and a shielded 2-meter XLR cable is included, reducing what you need to buy separately.
Specifications
| Item | Details |
|---|---|
| ZDM-1 type | Dynamic |
| ZDM-1 pattern | Supercardioid |
| ZDM-1 frequency response | 50 – 18,000 Hz |
| ZDM-1 sensitivity | -54 dBV/Pa (2.0 mV) |
| ZDM-1 output impedance | 200 ohms |
| ZDM-1 max SPL | 135 dB |
| ZDM-1 connector | XLR-M |
| ZDM-1 dimensions | 150 mm x 54 mm dia. |
| ZDM-1 weight | 400 g |
| ZHP-1 type | Closed dynamic |
| ZHP-1 driver | 40 mm, neodymium magnet |
| ZHP-1 frequency range | 10 – 20,000 Hz |
| ZHP-1 impedance | 68 ohms at 1 kHz |
| ZHP-1 max input | 200 mW |
| ZHP-1 cable | 3 m straight, single-sided, stereo mini |
| ZHP-1 weight | 220 g |
What is included and system requirements
- ZDM-1 dynamic microphone
- ZHP-1 closed-back monitor headphones
- TPS-4 desktop mic stand
- Dedicated windscreen
- Mic clip and thread adapter
- 2 m XLR mic cable
How to use it
- Open the TPS-4 tripod, adjust the height and place it on the desk.
- Attach the ZDM-1 to the stand using the mic clip.
- Fit the windscreen over the microphone.
- Connect the mic to the XLR input of your recorder or interface with the XLR cable.
- Plug the ZHP-1 stereo mini connector into the headphone output.
- Speak fairly close to the mic and set the gain.
- Listen on the headphones and check that the level does not clip before recording.
A first podcast setup
Because mic, headphones, stand and cable come together, it may suit someone who wants to avoid piecing a kit together.
Streaming or radio-style talk
The dynamic design that picks up less room sound may fit talk shows or streams from a home desk.
Narration and reading at home
It may be handy for recording video narration or readings while monitoring on headphones.
Recording on location
The folding stand is light and may be convenient to carry along with a field recorder.
Who it may suit
- Those starting a podcast or stream who want a complete kit.
- People who own or plan to buy an XLR-equipped recorder such as a ZOOM PodTrak.
- Anyone concerned about room sound who wants to try a dynamic mic.
- Home narrators looking for a mic-and-headphone set.
Good to know before you buy
- The mic is XLR, so you need a recorder, mixer or interface with an XLR input; no recorder is included.
- The headphones use a stereo mini plug, so an adapter may be needed for other jacks.
- ZOOM lists the pack as open-priced; its own store price appears on the official page.
Price
Please check the official page for the price.
See ZDM-1PMP Podcast Mic Pack on the product page
Sources: zoomcorp.com (checked 2026-10-27)
Comments