Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to LEWITT LCT 441 FLEX, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
Studio allrounder with 8 polar patterns.
— LEWITT official site
What is LCT 441 FLEX?
The LEWITT LCT 441 FLEX is an XLR condenser microphone with a 1-inch diaphragm and eight selectable polar patterns. The official page positions it for vocals, instruments and content creation.
The patterns are omni, wide cardioid, cardioid, supercardioid and figure-8, plus three reversed patterns. Switching lets you choose between a tight pickup and a more open room sound.
It has a full-metal housing and weighs 325 g. The compact shape keeps your face visible to a camera. Sensitivity is 17.2 mV/Pa, max SPL is 144 dB SPL and self-noise is 7 dB(A).
It runs on 48 V phantom power and includes a shock mount, magnetic pop filter, foam windscreen and transport bag.
LEWITT positions it as a studio allrounder, noting that three reverse patterns change the overall recording direction, so you can move between highly directional capture and a more open room sound.
Suggested uses include vocals, acoustic instruments, guitar amplifiers, drums, room miking, podcasts and streams; the reverse patterns are pointed to for guitar cabinets, drums and room mics.
Eight polar patterns
From omni to figure-8, including reversed patterns. It may help when the recording place or number of people changes.
1-inch diaphragm
A condenser with a 25.4 mm diaphragm and 17.2 mV/Pa sensitivity.
144 dB max SPL
Max SPL is 144 dB SPL at 0.5% THD, which may offer headroom for loud sources.
Low self-noise
Self-noise is 7 dB(A), which may help with quiet sources.
Compact metal housing
A zinc die-cast housing at 138 × 52 × 36 mm and 325 g, suited to use in front of a camera.
Included accessories
A shock mount, pop filter, windscreen and bag are included.
Eight patterns including reverse types
Omni, wide cardioid, cardioid, supercardioid, figure-8 and three reverse patterns.
Dynamic range figures
The spec table lists 87 dB(A) signal-to-noise ratio and 137 dB(A) dynamic range.
Current and enclosure
4 mA at 48 V phantom power; zinc die-cast enclosure.
Manuals
A quick start guide and full English manual are linked as PDFs.
Specifications
| Item | Details |
|---|---|
| Type | Condenser (externally polarized) |
| Diaphragm | 1 inch (25.4 mm) |
| Polar patterns | Omni, wide cardioid, cardioid, supercardioid, figure-8, reverse cardioid, reverse wide cardioid, reverse supercardioid |
| Frequency response | 20 Hz-20 kHz |
| Sensitivity | 17.2 mV/Pa (-35.3 dBV/Pa) |
| Max SPL | 144 dB SPL (0.5% THD) |
| Self-noise | 7 dB(A) |
| Impedance | 54 ohms |
| Power | 48 V ±4 V (4 mA) |
| Connector | Gold-plated 3-pin XLR |
| Weight | 325 g (11.5 oz) |
| Dimensions | 138 × 52 × 36 mm |
| Signal-to-noise ratio | 87 dB(A) |
| Dynamic range | 137 dB(A) |
| Current | 4 mA |
| Enclosure | Zinc die-cast |
| Warranty | 2 years with a 30-day money-back guarantee |
What is included and system requirements
- Microphone
- Shock mount
- Magnetic pop filter
- Foam windscreen
- Transport bag
- Requires 48 V phantom power
How to use it
- Set the microphone in the shock mount on a stand or arm.
- Connect it to an audio interface with an XLR cable.
- Turn on 48 V phantom power.
- Choose a polar pattern to suit the situation.
- Attach the pop filter.
- Set the gain.
- Do a test recording and check distance and pattern.
- Store it in the transport bag.
Podcasts and streaming
The official page lists podcasts and streams. The compact shape works in front of a camera.
Vocal recording
Cardioid may suit recording close to the mouth.
Acoustic instruments
Omni or wide cardioid may suit recordings that include some room sound.
Two-person conversation
Figure-8 may suit two people facing each other.
Guitar amps and drums
Switchable patterns incl. reverse types may help adjust direction and room pickup per source.
One mic for voice and instruments
Eight patterns may suit those who want one mic for varied recording tasks.
Who it may suit
- People who want to switch patterns for different situations
- People with an XLR audio interface
- People who stream and record music
- People who want a compact mic for camera
Good to know before you buy
- It is XLR and needs 48 V phantom power.
- The price is not shown on the official page.
- The frequency range is listed as 20 Hz-20 kHz, with no response curve provided.
- The page does not describe the physical switching procedure; check the manual.
How it differs from similar products
We do not pick a winner; the official figures are placed side by side.
LEWITT RAY
The LCT 441 FLEX has eight patterns, 144 dB max SPL and 7 dB(A) self-noise. The RAY is cardioid-only with 131 dB and 8 dB(A) and adds distance tracking (official).
Price
Please check the official page for the price.
See LCT 441 FLEX on the product page
Sources: lewitt-audio.com (checked 2026-10-27)
Comments