Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to HyperX QuadCast 2 / QuadCast S, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
24-bit, 96kHz
— HyperX official site
What is QuadCast 2 / QuadCast S?
The HyperX QuadCast 2 is a full-aluminum USB microphone aimed at streamers, gamers and content creators. The official page describes it as a refinement of the original QuadCast with a redesigned shock mount and a multifunction knob.
It has three 14 mm electret condenser capsules and four switchable polar patterns: cardioid, omnidirectional, stereo and bidirectional. It is listed as recording at 24-bit, 96 kHz.
The top has a tap-to-mute sensor with a status LED, and the knob adjusts gain, playback volume, monitoring volume and polar pattern. The red lighting can be customized.
The QuadCast S is a current model in the same line, with the same three 14 mm capsules, four polar patterns, tap-to-mute and two-zone RGB lighting.
HP Japan's page lists the QuadCast 2 for game streaming, video production, podcasts, online meetings, instruments, vocals and ASMR. A rotary knob and button adjust gain, volume, zero-latency monitoring and polar pattern without software.
A higher model, the QuadCast 2 S, adds 32-bit/192 kHz recording and RGB lighting; HP says basic operation is shared.
The QuadCast S has a gain dial on the underside, a built-in pop filter and an elastic rope shock mount, and is listed as Discord and TeamSpeak certified and compatible with OBS, Streamlabs OBS and XSplit.
Four polar patterns
You can switch between cardioid, omnidirectional, stereo and bidirectional. It may handle conversations or multi-person recordings as well as solo use.
Three 14 mm capsules
Both the QuadCast 2 and QuadCast S list three 14 mm electret condenser capsules.
Tap-to-mute with LED
Tapping the top mutes the mic and the LED shows status. It may help when you need to mute quickly while live.
Multifunction knob on QuadCast 2
The knob adjusts gain, playback volume, monitoring volume and polar pattern. It may suit people who want controls in one place.
USB-C and 3.5 mm monitoring
It connects over USB-C with a 3.5 mm headphone output for monitoring. The QuadCast 2 includes a USB-C cable and a USB-A adapter.
HyperX NGENUITY software
Tuning, monitoring and lighting can be handled in the HyperX NGENUITY software.
Multifunction knob
Holding the knob's center button cycles through four polar patterns, shown by LED.
Pogo-pin shock mount
It attaches and detaches with a 10-degree twist and uses an elastic rope suspension. A universal mount must accommodate 55 mm and not block the knob.
QuadCast S extras
A built-in pop filter, a mount adapter for 3/8 and 5/8 inch threads and 2-zone RGB lighting.
Specifications
| Item | Details |
|---|---|
| Type | USB condenser microphone |
| Capsules | Three 14 mm electret condenser |
| Polar patterns | Cardioid, omnidirectional, stereo, bidirectional |
| Frequency response | 20 Hz-20 kHz |
| Sensitivity | -7.5 dB (1 V/Pa, 1 kHz) |
| Self-noise | ≤-77 dBV (A-weighted) |
| SNR | ≥100 dB |
| Bit depth / sample rate | 24-bit / 96 kHz (QuadCast 2) |
| Connections | USB-C, 3.5 mm headphone output |
| Warranty | 2 years |
| QuadCast 2 (HP Japan) | 44.1/48/96 kHz, 16/24-bit, 335 g, 16 lighting zones, THD 0.05% or less |
| QuadCast 2 headphone noise | -110 dBV or less (A-weighted) |
| QuadCast S | Sensitivity -36 dB (1V/Pa), self-noise <= -95 dBFS, SNR >= 90 dB, mic weight 0.55 lb |
| Thread sizes (QuadCast 2) | 3/8 and 5/8 inch |
What is included and system requirements
- QuadCast 2 microphone
- 3 m USB-C to USB-C cable
- USB-C to USB-A adapter
- Quick start guide
- Desktop stand
- Works with PC, Mac, PS4, PS5, Nintendo Switch and Steam Deck
- QuadCast S: microphone, USB cable, mount adapter, quick start guide (boom arm not included)
- US page lists PC, Mac, PS4, PS5, Nintendo Switch and Steam Deck for QuadCast 2
How to use it
- Mount the microphone on the stand.
- Connect it to the computer with the USB-C cable.
- Select the QuadCast as the input device on the computer.
- Plug headphones into the 3.5 mm jack if needed.
- Choose a polar pattern with the knob.
- Set the gain with the knob.
- Tap the top to check the mute behavior.
- Use HyperX NGENUITY for settings and lighting if needed.
Streaming and gaming
Tap-to-mute and lighting make it streamer-oriented, and it works with consoles.
Interviews and podcasts
Switching to bidirectional or omnidirectional may let you record two or more people.
Solo voice recording
The cardioid setting may suit one person speaking toward the mic.
Online meetings
Because it works over USB, it may also serve for meetings.
One mic for meetings and streams
Switchable patterns may suit both solo streaming and multi-person sessions.
Streams with lighting
Adjustable LED lighting may appeal to people styling a visible desk setup.
Who it may suit
- People who value lighting and on-body controls for streaming
- People who want to record two or more people with one mic
- People who want to use it with game consoles
- People who want to start with USB only
Good to know before you buy
- The QuadCast 2 is $149.99 and the QuadCast S is $119.99 (official MSRP).
- There is no XLR output; connection is USB only.
- The official page shows a sale banner, so prices may change.
- HP Japan lists QuadCast 2 in black and frost; standard warranty is 2 years.
- QuadCast 2 tops out at 96 kHz; the QuadCast 2 S supports 192 kHz.
How it differs from similar products
We do not pick a winner; the official figures are placed side by side.
HyperX QuadCast S
The QuadCast 2 is $149.99, 24-bit/96 kHz, with a multifunction knob.The QuadCast S is $119.
Price
$149.99 (HyperX official site, checked 2026-10-27). Prices can vary by region and promotion, so check the official page before buying.
See QuadCast 2 / QuadCast S on the product page
Sources: hyperx.com jp.ext.hp.com (checked 2026-10-27)
Comments