Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to Elgato Wave DX, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
The finely tuned frequency response range reproduces precise vocals without coloration — perfect for sculpting your signature sound with effects and EQ.
— Elgato official site
What is Wave DX?
The Elgato Wave DX is an XLR dynamic microphone. The maker aims for detail close to a condenser while rejecting surrounding noise. It is presented for broadcast, streaming, podcast and commentary voice work.
The capsule is a dynamic type selected in cooperation with LEWITT Audio, with a cardioid pattern. The maker describes it as forgiving, so a voice can still be picked up when speaking slightly off-axis.
Inside is a pop shield made of nylon fiber between layers of foam to reduce plosives. The signal path has no circuitry, and the maker says it works with many audio interfaces without a booster.
The housing is hardened steel and the weight is about 440 g. The logo can be moved and rotated, and the swivel mount comes with 3/8 inch and 1/4 inch thread adapters, fitting common mic arms.
Cardioid dynamic capsule
It uses a capsule selected with LEWITT Audio and a pattern that rejects surrounding sound. It may help when recording voice in a noisy room.
Internal pop shield
Layers of foam and nylon fiber soften plosive breaths. You may be able to start without a separate pop filter.
Usable proximity effect
The maker says the proximity effect is optimized so bass grows as you get closer. It may suit people who shape voice weight by distance.
XLR connection without a booster
The maker says it works with many XLR interfaces without a booster. Sensitivity is 2.5 mV/Pa (-52 dBV/Pa).
Movable logo and swivel mount
The logo can be mounted on either side to face the camera. The swivel mount helps avoid cable tangles.
Wave XLR and Wave Link compatibility
The maker says Wave XLR adds Wave Link integration and Marketplace VST effects. It may appeal to people building an Elgato setup.
Specifications
| Item | Details |
|---|---|
| Capsule | Dynamic |
| Polar pattern | Cardioid |
| Frequency response | 50 Hz to 15 kHz |
| Sensitivity | 2.5 mV/Pa (-52 dBV/Pa) |
| Impedance | 600 ohm |
| Connector | 3-pin XLR |
| Dimensions | 53 x 53 x 146 mm |
| Weight | 440 g |
| Mounting | 5/8 inch mount with 3/8 and 1/4 inch adapters |
| Pop filter | Internal |
What is included and system requirements
- Wave DX microphone
- Swivel mount
- 3/8 inch and 1/4 inch thread adapters
- Quick Start Guide (XLR cable and audio interface not included)
How to use it
- Attach the mic to the swivel mount and fix it to an arm or stand.
- Connect it to an interface mic input with an XLR cable.
- Start with low gain and raise it while speaking.
- Try distances from a few centimeters outward and listen to how the proximity effect changes.
- Reposition the logo if needed.
- Check the input level in your recording or streaming software.
Streaming
The maker targets streamers. It may be easy to place on an arm in view of the camera.
Podcast and radio
As a dynamic mic that rejects surroundings, it may suit rooms with a lot of reverberation.
Narration and home vocals
As a voice mic, it may also be used for narration or vocal recording.
Who it may suit
- People starting streaming or recording with an XLR mic
- People bothered by room noise or reverb
- People building an Elgato setup
Good to know before you buy
- An XLR cable and an audio interface are needed separately.
- It does not connect via USB.
- Wave Link integration needs Wave XLR or similar.
Price
$99.99 (Elgato official site, checked 2026-10-27). Prices can vary by region and promotion, so check the official page before buying.
See Wave DX on the product page
Sources: elgato.com (checked 2026-10-27)
Comments