Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to LEWITT CONNECT 2, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
CONNECT 2 is the most user-friendly audio interface for musicians and content creators.
— LEWITT official site
What is CONNECT 2?
CONNECT 2 is a USB-C audio interface from Austrian microphone maker LEWITT. It is presented for musicians and content creators with an emphasis on ease of use.
It has one balanced XLR mic input (48 V phantom power) and one Hi-Z instrument input. Outputs are two balanced 6.3 mm speaker jacks plus 6.3 mm and 3.5 mm headphone outputs. Sample rates are 44.1/48/96 kHz at 24-bit, and it is USB bus powered.
Its main appeal is one-click processing: Autosetup dials in settings, Clipguard prevents clipping, and Compressor and Denoiser act with a single click. Three preamp sounds are selectable: Clean, Warm and Vivid.
Controls are capacitive touch, with direct mute for all channels and LEDs whose color and brightness can be set individually. Settings are made in the free CONTROL CENTER software for Mac and Windows, and Loopback captures computer audio.
Official figures for the mic input: gain 0 to 72 dB, dynamic range 118 dB(A), THD 0.001%, equivalent input noise -129 dBV(A) and maximum input level 15.8 dBV. Frequency response is 20 Hz to 20 kHz (±0.1 dB), with 48 V phantom power.
The Hi-Z 6.3 mm instrument input offers 0 to 60 dB gain at 2.5 MOhm impedance, with 121 dB(A) dynamic range (105 dB(A) without Clipguard). It has 4 inputs (including 2 software channels) and 2 outputs, follows USB Audio Class 2.0, and has an ASIO driver.
Autosetup
This feature dials in input settings automatically. It may reduce the steps before a first recording for people unfamiliar with setting gain.
Clipguard
It guards against input clipping, which may reduce re-takes in streams and narration where volume changes suddenly.
One-click Compressor and Denoiser
Compression and noise reduction can be switched on with one press, processed by the interface's DSP, which suits cases where you want to avoid heavy plug-ins on the computer.
Three preamp sounds
Choose from Clean, Warm and Vivid. The official text does not detail how they differ, so you would compare them in use.
Touch controls and LEDs
Capacitive touch replaces knobs and allows direct mute of all channels. LED color and brightness are adjustable, and gain reduction is displayed.
Loopback and monitor mix
Loopback adds computer audio to the recording or stream, and the input/playback mix sets the balance you hear. It may help when you need to send music and voice together.
Included software
Space Replicator Essential is included along with Steinberg Cubase LE and Cubasis LE, so you can go from recording to editing without extra purchases.
25-step metering
A 25-step level meter and a gain reduction display let you read levels at a glance.
Mobile and macOS modes
There are macOS and mobile modes; USB-C iOS devices are plug and play, while Lightning devices need a Camera Connection Kit and external bus power.
DSP blocks and input/playback mix
It includes a low-cut filter, preamp modes and Autogain, plus an input/playback mix.
Kensington lock and 48 V button
A Kensington lock slot, a dedicated 48 V on/off button and a custom button are provided.
Specifications
| Item | Details |
|---|---|
| Connection | USB-C (USB Audio Class 2.0) |
| Inputs | 1 mic (balanced XLR) / 1 instrument (Hi-Z 6.3 mm) |
| Outputs | 2 speaker (balanced 6.3 mm) / headphone 6.3 mm and 3.5 mm |
| Sample rate / bit depth | 44.1 / 48 / 96 kHz, 24-bit |
| Mic gain | 0 to 72 dB |
| Mic EIN | -129 dBV(A) |
| Mic dynamic range | 118 dB(A) |
| Frequency response | 20 Hz to 20 kHz (+/-0.1 dB) |
| Dimensions / weight | 151 x 110 x 41 mm / 394 g |
| Power | USB bus powered |
| Phantom power | 48 V (on/off button) |
| ASIO driver | Yes |
| Mic input gain | 0 to 72 dB |
| Instrument input gain | 0 to 60 dB |
| Speaker outputs | 2 x 6.3 mm balanced, 200 Ohm, max 12.2 dBV |
| Headphone outputs | 6.3 mm / 3.5 mm, 1.9 Ohm, max 6.8 dBV |
| Dimensions | 151 x 110 x 41 mm |
| Weight | 394 g |
| System requirements | Windows 10 (64-bit) / macOS 10.15+, 4 GB RAM, USB 2.0 |
| Warranty | 2 years (plus 30-day money-back guarantee) |
What is included and system requirements
- USB-C to USB-C cable
- USB-C to USB-A adapter
- Software: LEWITT CONTROL CENTER, Steinberg Cubase LE, Cubasis LE, Space Replicator Essential
- Windows: Windows 10 (64-bit), 4 GB RAM, USB 2.0; LEWITT ASIO driver required
- macOS: 10.15 or later, 4 GB RAM, USB 2.0; plug and play
- iOS: plug and play with USB-C devices; Lightning devices need the Camera Connection Kit and external power
- USB-C to USB-C cable
- USB-C to USB-A adapter
How to use it
- Connect the interface to your computer's USB port with the included USB-C cable.
- On Windows, install the LEWITT ASIO driver and CONTROL CENTER.
- Plug a mic into the XLR input and press the 48 V button if it is a condenser.
- Connect guitars and other instruments to the Hi-Z 6.3 mm input.
- Connect headphones or speakers to the outputs.
- Use Autosetup, or adjust gain manually to set the input level.
- Choose a preamp sound (Clean, Warm or Vivid) and enable Compressor or Denoiser if needed.
- Select CONNECT 2 as the input/output device in your DAW and start recording.
- Settings are made in the free CONTROL CENTER software for Mac and Windows.
Streaming and podcasts
Loopback captures computer audio and one-click noise reduction and compression are available, which may suit streams where you want little setup.
Vocal and guitar home recording
With a mic input and a Hi-Z input in one box, you may record vocals and guitar, using up to two inputs at once.
Online meetings and remote sessions
Touch mute for all channels and LED status may be handy during meetings or live streams.
Narration
Autosetup, Clipguard and Denoiser together may make it easier to handle readings with big volume changes.
Streaming with computer audio
Loopback captures computer playback, which may suit streams mixing voice with music or call audio.
Who it may suit
- First-time interface buyers
- Streamers and podcasters who want tidy voice with little setup
- Users who need just one XLR mic plus one instrument
- People who prefer touch controls over software menus
Good to know before you buy
- Only one mic and one instrument input are available, so it does not suit multi-mic recording.
- On Windows, the LEWITT ASIO driver is required for optimal performance.
- Lightning iOS devices need the Camera Connection Kit and external power.
- The official page lists no price, so check with retailers.
- Lightning iPhones/iPads need a Camera Connection Kit and external bus power.
Price
Please check the official page for the price.
The official page lists no numeric price, only that prices include VAT.
See CONNECT 2 on the product page
Sources: lewitt-audio.com (checked 2026-10-27)
Comments