MENU

EVE Audio TS108: features, how to use and who it suits

Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.

An introduction to EVE Audio TS108, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.

Get more bass in your studio

— EVE Audio official site

TOC

What is TS108?

The TS108 is an active subwoofer in EVE Audio's ThunderStorm range with an 8-inch woofer. The maker introduces it as a way to get more bass in the studio.

A 150 W PWM amplifier drives a proprietary 8-inch woofer. Frequency range is 33 Hz to 300 Hz and maximum SPL is 105 dB at 1 m. A passive radiator replaces a port, avoiding port noise according to the maker.

The rear has balanced XLR inputs and outputs (stereo in/out, LFE in, LFE/sub out) and an unbalanced input for the SC203. A satellite filter (full range / 80 Hz), phase switch and a variable 60 to 140 Hz filter help tailor it to a room.

The DSP only affects the bass driver, leaving the satellite signal analog. A remote is included to adjust the subwoofer and system volume from the sweet spot.

Passive radiator design

A passive radiator supplements the bass instead of a port. The maker says this avoids air turbulence noise and port resonance and lets compact cabinets tune lower.

8-inch woofer with PWM amplifier

A 150 W PWM amplifier drives a proprietary 8-inch woofer, with response from 33 Hz to 300 Hz, which may help extend lows your main monitors do not reach.

Stereo and LFE connections

Balanced XLR inputs and outputs (stereo in/out, LFE in, LFE/sub out) support both stereo setups and surround setups using LFE.

Variable crossover and phase switch

The subwoofer filter is variable from 60 to 140 Hz and phase switches between 0 and 180 degrees. These may help blend with the main monitors in your room.

Analog satellite path

DSP only processes the bass driver and the satellite path has no A/D or D/A conversion. The Pure Satellite function bypasses the subwoofer and its DSP filter section.

Remote and SMART-knob

The remote adjusts subwoofer and overall system volume, while the SMART-knob sets and saves filters and volume. Settings can be locked.

Specifications

ItemDetails
TypeActive subwoofer (listed as 8-inch)
Woofer8-inch
Passive radiator8-inch
Output power150 W
Frequency range (-3 dB, 1 m)33 Hz – 300 Hz
Max SPL105 dB
Subwoofer filter60 to 140 Hz (variable) + LFE
Satellite filterFull range / 80 Hz
Phase0 / 180 degrees
Input level switch+8 dBu / +22 dBu
Standby power< 1 W
Maximum consumption170 VA
Dimensions (W x H x D)280 x 415 x 365 mm
Weight11.5 kg
Remote controlIncluded

What is included and system requirements

  • Subwoofer
  • Remote control
  • Filter control via SMART-knob
  • All Black Edition available

How to use it

  1. Place the subwoofer at the front of the room, between or near the left and right monitors.
  2. Connect the power cable.
  3. Connect the left and right outputs of your interface to the subwoofer's XLR inputs.
  4. Connect the subwoofer's XLR outputs to the left and right monitors.
  5. Choose full range or 80 Hz for the satellite filter.
  6. Set the subwoofer filter between 60 and 140 Hz to match where your monitors roll off.
  7. Switch phase between 0 and 180 degrees and keep the setting where the bass blends best.
  8. Match the level using the remote.

Mixes where low end matters

It may suit checking bass that main monitors alone make hard to judge.

Video and surround work

With an LFE input it may serve as the low-frequency channel in surround.

Extending a small-room setup

It may be worth considering when adding bass range to compact monitors at home.

Who it may suit

  • Those who want to add bass to compact monitors
  • Surround producers needing an LFE channel
  • Users who want to adjust volume with a remote

Good to know before you buy

  • It is an active subwoofer and needs mains power.
  • Bass response varies with placement and phase.
  • The spec table includes items from a shared template.

How it differs from similar products

We do not pick a winner; the official figures are placed side by side.

TS107

The TS107 lists 100 W, a 6.5-inch woofer, 36 Hz to 300 Hz, 102 dB and 8.2 kg. The TS108 lists 150 W, an 8-inch woofer, 33 Hz to 300 Hz, 105 dB and 11.5 kg.

Price

Please check the official page for the price.

See TS108 on the product page

Sources: eve-audio.com (checked 2026-10-27)

Let's share this post !

Author of this article

Comments

To comment

TOC