Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to Marantz Professional MPM-1000U, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer.
— Marantz Professional official site
What is MPM-1000U?
MPM-1000U is a USB condenser microphone from Marantz Professional, described for DAW recording and podcasting.
It is designed to connect directly to a computer's USB port, with a built-in driver for plug-and-play operation.
The page cites extended frequency response, low self-noise and a high-speed A/D converter. The element is a 14 mm back electret condenser.
The box holds the microphone, a USB cable and a mic clip, suiting those who want to start home recording or podcasting without an audio interface.
Direct USB connection
The microphone contains an A/D converter (48 kHz/16-bit) and connects to a computer through USB alone, handy for starting without an interface.
Back electret element
It uses a 14 mm back electret condenser element with sensitivity of -34 dB ±2 dB.
Low self-noise
Self-noise is listed at 16 dBA with a signal-to-noise ratio of 78 dB, relevant for quiet-room voice recording.
Max SPL of 132 dB
Max SPL is 132 dB at 1 kHz (under 1% THD), possibly leaving headroom for loud voices at close range.
Built-in driver
A built-in driver enables plug-and-play operation, so there is little software setup.
Specifications
| Item | Details |
|---|---|
| Element | Back electret condenser |
| Element diameter | 14 mm |
| Frequency response | 20-17,000 Hz |
| Sensitivity | -34 dB ±2 dB (0 dB = 1 V/Pa at 1 kHz) |
| Output | USB |
| A/D converter | 48 kHz / 16-bit |
| Output impedance | 100 ohm ±30% (1 kHz) |
| Load impedance | over 1 kohm |
| Self-noise | 16 dBA |
| Max SPL | 132 dB (1 kHz, under 1% THD) |
| Signal-to-noise ratio | 78 dB |
What is included and system requirements
- Microphone
- USB cable
- Mic clip
How to use it
- Fit the microphone into the clip and onto a stand.
- Connect it to the computer with the USB cable.
- Wait for the computer to recognise it.
- Select MPM-1000U as the input in sound settings or your DAW.
- Position it at a sensible distance and set the level.
- Record a test to check for noise and distortion.
Podcasting
Described for podcasting, it may suit spoken-word recording.
Home vocals and narration
Stated for DAW recording, it may serve simple vocal or narration tracking.
Streaming and meetings
USB-only use may make it an easy upgrade for stream or meeting audio.
Who it may suit
- Those starting without an audio interface
- Podcast beginners
- People wanting simple voice or vocal tracking in a DAW
Good to know before you buy
- A/D conversion is fixed at 48 kHz/16-bit.
- As a USB microphone it cannot be used as an XLR microphone.
- No price appeared on the official page.
Price
Please check the official page for the price.
See MPM-1000U on the product page
Sources: marantzpro.com (checked 2026-10-27)

Comments