MENU

Shure SRH840A monitor headphones: features and spec-based rating

Shure SRH840A monitor headphones: features and spec-based rating

Shure’s SRH840A is a pair of closed-back monitor headphones.

Monitor headphones are headphones for hearing sound exactly as it is when you record or mix.

In this article we rate it on 5 criteria using only the specifications the manufacturer publishes, and show how it ranks among the 20 monitor headphones we compare.

Disclosure: This site takes part in affiliate programs. Specifications are as of the date we checked them and can change.

Shure / Monitor headphones
SRH840A
ARank A (2nd from the top of the four ranks S, A, B and C)
Score 3.8 / 5 (average of the 20 models compared: 3.6)
Specs last checked
2026/10/19
Type
Closed-back
Impedance
40Ω
Weight
273g
Upper limit
25,000Hz
Price (store, date)
Not disclosed

Closed-back and open-back headphones compared
Figure: SoundBounty

TOC

Summary

Among the 20 monitor headphones, SRH840A is rank A. The ranks run S, A, B and C, and A is second from the top. Averaging the scores for each criterion (out of 5) gives 3.8.

Strengths

  • Ease of driving (40 Ω, 4 points): You can easily get enough volume even from an audio interface or a smartphone.
  • Low-frequency range (5 Hz, 5 points): You can check the low end solidly.
  • Suitability for recording (sound leakage) (closed-back design, 5 points): They leak little sound, so they can be used while recording vocals.

Things to keep in mind

  • Lightness (273 g, 2 points): They are on the heavy side, so you may tire in long sessions.

Who it suits: judging from the specifications, it suits people who want enough volume from an audio interface or smartphone without a headphone amplifier; people who want to check the low end solidly; people who want less sound leakage while recording.

Main features of SRH840A

Closed-back with a wide frequency range

They are closed-back headphones with 40 mm neodymium dynamic drivers, published with a frequency response of 5 to 25,000 Hz. The manufacturer explains that they are tuned for rich bass, bright mids and extended highs.

Folding, a detachable cable and a carrying bag

They fold flat. The cable is a locking detachable one (3 m, straight), and a carrying bag is included.

Specifications

The impedance is 40 Ω, the sensitivity is 97 dB/mW and the weight is 273 g without the cable.

Where it is useful

  • Handling both vocal recording and mix checking with one pair
  • Carrying them around

Rating by criterion

Ease of driving: 4 / 5

Whether you can get volume without a headphone amplifier (impedance). The smaller the number, the easier they are to drive.

SRH840A: 40 Ω. That is a high rating among the products we compared. You can easily get enough volume even from an audio interface or a smartphone.

Low-frequency range: 5 / 5

How low a sound they can reproduce (the lower limit of the frequency response).

SRH840A: 5 Hz. That is a high rating among the products we compared. You can check the low end solidly.

High-frequency range: 3 / 5

How high a sound they can reproduce (the upper limit of the frequency response).

SRH840A: 25,000 Hz. That is a standard rating among the products we compared.

Lightness: 2 / 5

The weight of the headphones. The lighter they are, the less they tire you over long periods.

SRH840A: 273 g. That is a modest rating among the products we compared. They are on the heavy side, so you may tire in long sessions.

Suitability for recording (sound leakage): 5 / 5

Whether they are closed-back, which leaks little sound. Less leakage means the headphone sound does not get into the microphone while you sing.

SRH840A: closed-back design. That is a high rating among the products we compared. They leak little sound, so they can be used while recording vocals.

The gray marks in the figure below (the dotted line on the pentagon) show the average of the 20 products we compared. Price is not part of the score.

12345Ease of driving4 ptsLow-frequency range5 ptsHigh-frequency range3 ptsLightness2 ptsSuitability for recording (sound leakage)5 pts
SRH840A20models average
Ease of driving
4/5
What we look atImpedance (the lower it is, the easier to reach a good volume from a small amplifier)
This product40 Ω
Low-frequency range
5/5
What we look atLower limit of the frequency response
This product5 Hz
High-frequency range
3/5
What we look atUpper limit of the frequency response
This product25,000 Hz
Lightness
2/5
What we look atWeight (cable excluded)
This product273 g
Suitability for recording (sound leakage)
5/5
What we look atClosed-back or open-back (closed-back keeps sound out of the microphone while you sing)
This product1
How we score (Monitor headphones)
CriterionBasis5 pt4 pt3 pt2 pt1 pt
Ease of drivingImpedance (the lower it is, the easier to reach a good volume from a small amplifier)≤32≤40≤55≤100>100
Low-frequency rangeLower limit of the frequency response≤5≤8≤15≤20>20
High-frequency rangeUpper limit of the frequency response≥40000≥30000≥25000≥22000<22000
LightnessWeight (cable excluded)≤200≤220≤250≤290>290
Suitability for recording (sound leakage)Closed-back or open-back (closed-back keeps sound out of the microphone while you sing)Closed-back———Open-back

Scored only on the body specifications published by the manufacturer. Price and accessories are not part of the score. Ease of driving is compared by impedance (Ω), which every manufacturer publishes. The lower the number, the easier it is to reach a good volume from the headphone jack of an audio interface or a smartphone, so a headphone amplifier is less likely to be needed (sensitivity is shown in the table for reference). "Suitability for recording" scores closed-back headphones higher because the sound is less likely to leak into the microphone while you sing. If you choose open-back headphones for mixing, you can ignore this item.

SRH840A connection and getting started

Connection3.5 mm plug (with a screw-on 6.3 mm adapter). Locking detachable cable (3 m)
In the boxDetachable straight cable, carrying bag, 6.3 mm adapter (2-year warranty)

Checked on the manufacturer’s official pages on October 17, 2026.

Compared with other monitor headphones

Click a heading to sort. On a phone, the table scrolls sideways.

ProductRankAvg. scoreTypeImpedanceΩSensitivitydB/VLower limitHzUpper limitHzWeightgPrice (store, date)
Audio-TechnicaATH-M20xA 3.4Closed-back47109.31520,000190Not disclosed
Audio-TechnicaATH-M30xA 3.4Closed-back47109.31522,000220Not disclosed
Audio-TechnicaATH-M40xA 3.4Closed-back35112.61524,000240Not disclosed
Audio-TechnicaATH-M50xA 3.4Closed-back38113.21528,000285Not disclosed
Audio-TechnicaATH-M70xS 4.2Closed-back35111.6540,000280Not disclosed
Audio-TechnicaATH-R70xB 3.2Open-back470101.3540,000210Not disclosed
SonyMDR-M1S 4.4Closed-back50115580,000216Not disclosed
SonyMDR-M1STS 4.8Closed-back24119.2580,000215Not disclosed
SonyMDR-CD900STS 4.2Closed-back63118530,000200Not disclosed
YamahaHPH-MT8B 3.2Closed-back37116.31528,000350Not disclosed
YamahaHPH-MT5B 2.8Closed-back51112.92020,000245Not disclosed
beyerdynamicDT 770 PRO 80ΩA 4.0Closed-back80Not disclosed535,000Not disclosedNot disclosed
beyerdynamicDT 990 PRO 80ΩB 3.0Open-back80Not disclosed535,000250Not disclosed
SennheiserHD 280 PROB 3.2Closed-back64Not disclosed825,000285Not disclosed
SennheiserHD 25B 3.2Closed-back70Not disclosed1622,000140Not disclosed
ShureSRH440AB 3.2Closed-back401111022,000268Not disclosed
ShureSRH840AA 3.8Closed-back40111525,000273Not disclosed
AKGK371S 4.4Closed-back32114540,000255Not disclosed
beyerdynamicDT 770 PRO XA 3.8Closed-back48Not disclosed540,000305Not disclosed
SonyMDR-7506B 2.8Closed-back631181020,000230Not disclosed

Specifications are the manufacturer's published values (checked October 19, 2026). Sensitivity is written differently by each manufacturer, so it is shown for reference; beyerdynamic and the Sennheiser HD 280 PRO do not publish a sensitivity.

Before you buy

  • They are closed-back. They leak little sound, so they are also easy to use for recording vocals.
  • The impedance is 40 Ω. The impedance is on the low side, so it is relatively easy to reach a good volume even from the headphone jack of an audio interface. For reference, the sensitivity (loudness per 1 V) is 111 dB/V.

Read next

Let's share this post !

Author of this article

Comments

To comment

TOC