Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to Austrian Audio MiCreator Studio, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
Plug in, monitor in real time, and expand your rig anytime – no limits, just flow.
— Austrian Audio official site
What is MiCreator Studio?
The MiCreator Studio combines a condenser microphone and a USB audio interface in one unit. Plug it into a computer over USB-C and the microphone signal goes straight into your recording software, so you can start recording vocals or instruments without a separate interface.
Recording resolution goes up to 48 kHz / 24-bit. The maker positions it for vocals, instruments and quick demo ideas. The capsule is a custom condenser design with a cardioid pickup pattern.
A built-in headphone output provides zero-latency monitoring so you can hear yourself while recording. The metal body and the movable head make it easy to use on a desk, in a rehearsal room or on the go.
It can be expanded with the MiCreator Satellite and the Y-Lav for a second source or stereo recording. The maker also states that Steinberg Cubase LE or WaveLab Cast is available free of charge.
Mic and interface in one
A condenser microphone and a USB audio interface are built into a single unit. It may help anyone who wants fewer devices and simpler cabling at the start of home recording.
USB-C up to 48 kHz / 24-bit
It connects over USB-C and complies with USB Audio Class 1.0/2.0. The maker states recording up to 48 kHz / 24-bit with most recording software.
Zero-latency headphone monitoring
The built-in headphone output lets you hear your signal without delay while recording. This may suit vocal or instrument takes where delay through a computer is distracting.
Two-step hardware gain
A hardware switch selects 0 dB (low) or 20 dB (high). You can switch between quiet and loud sources. Max SPL is 130 dB SPL at low gain.
Metal body and movable head
It measures 155 x 60 x 37 mm and weighs 370 g. The metal housing and movable head make it easy to aim at a mouth or an instrument.
Analog 3.5 mm connectors
It has a 3.5 mm TRRS IN/OUT (link, instrument, headphones) and a 3.5 mm TRS (headphones). These serve as the entry for add-on devices such as the Satellite.
Expandable setup
The maker says the MiCreator Satellite and Y-Lav can be added for a second source or stereo. You can start with one unit and expand later.
Add a second mic with Satellite
MiCreator Satellite is a second microphone using the same custom capsule, with a swivelable head and headphone output. Connected with the 1.4 m MCC2 link cable, it allows true stereo or a second sound source.
System Set with Minibar
The MiCreator System Set mounts Studio and Satellite on the MCMB Minibar. The maker says it can cover stereo drum recording and handle levels up to 130 dB SPL.
Y-Lav lavalier option
MiCreator Y-Lav is a lavalier microphone presented for interviews and on-the-go content, and it plugs into the system.
Customizable faceplates
Customizing files for the faceplates are available for download, and a set of two front and two back plates, DIY Plates Studio (29 US dollars), is sold separately.
Specifications
| Item | Details |
|---|---|
| Capsule | Custom condenser |
| Polar pattern | Cardioid |
| Frequency range | 20 Hz – 20 kHz |
| Sample rate / bit depth | Up to 48 kHz / 24-bit |
| Sensitivity | -35 dBFS/Pa (low gain), -15 dBFS (high gain) |
| Equivalent noise | 22 dB SPL (A) (high gain) |
| Gain switch | 0 dB (low) / 20 dB (high) |
| Max SPL | 130 dB SPL (low gain) |
| Headphone output | 45 mW (32 ohm load) |
| Digital connection | USB-C (USB Audio Class 1.0/2.0) |
| Analog connectors | 1x 3.5 mm TRRS IN/OUT, 1x 3.5 mm TRS (headphones) |
| Dimensions | 155 x 60 x 37 mm |
| Weight | 370 g |
| Price (official store) | $129 |
| Warranty | Up to 3 years (as shown on the official store) |
| Bundled software | Steinberg Cubase LE or WaveLab Cast (details on the official software page) |
What is included and system requirements
- Software: Steinberg Cubase LE or WaveLab Cast (stated as free)
- Connection: USB-C (USB Audio Class compliant)
- WaveLab Cast runs on Mac or Windows
How to use it
- Connect the unit to your computer with a USB-C cable.
- Select MiCreator Studio as the input device in your recording software.
- Set the gain switch to low (0 dB) and start with a modest level.
- Plug headphones into the headphone output and monitor your signal.
- Switch to high gain (20 dB) if the source is quiet.
- Adjust the movable head toward your mouth or the instrument.
- Record and check that the waveform is not too large.
- Add the MiCreator Satellite or Y-Lav later if you need a second source.
- Connect via USB-C, select MiCreator Studio as the input in your recording software, and set the gain switch to 0 dB (low) or 20 dB (high).
Home vocal recording
With the mic and interface in one unit, it may be a simple first step into vocal recording. The headphone output lets you hear yourself while recording.
Instrument sketches
It may suit acoustic instruments and quick idea capture, since it sits on a desk and records right away.
Recording on the go
At 370 g with a metal body, it could be carried to rehearsal rooms or other places, needing only a laptop and USB-C.
Two sources or stereo
Adding the Satellite or Y-Lav may extend it to a second source.
Stereo with two mics
Adding Satellite for stereo may suit people who want a wider image when recording acoustic instruments or ambience.
Podcast capture and editing
Since WaveLab Cast is an option, it may suit people who want to try capturing, editing and publishing with one mic and free software.
Who it may suit
- People who want to start recording without a separate interface
- People who want to record vocal or instrument demos quickly
- People looking for a portable recording setup
- People who may add a second mic later
Good to know before you buy
- Cardioid only; no pattern switching
- Sample rate is limited to 48 kHz
- Many accessories are sold separately (for example the MCSC case at 50 US dollars and the MCC1 instrument cable at 24 US dollars).
- The MiCreator System Set is priced at $199.
How it differs from similar products
We do not pick a winner; the official figures are placed side by side.
Austrian Audio MiCreator Satellite
According to the official pages, the Studio is the interface-equipped main unit, while the Satellite is an add-on mic using the same custom condenser capsule. The Satellite connects to the Studio via the MCC2 link cable (1.4 m, sold separately).
Price
$129 (Austrian Audio official site, checked 2026-10-27). Prices can vary by region and promotion, so check the official page before buying.
See MiCreator Studio on the product page
Sources: austrian.audio (checked 2026-10-27)
Comments