Disclosure: This page may contain affiliate links. Prices were checked on the date shown and may change.
An introduction to Apogee MiC Plus, based on information from the maker and distributors: what it does, how to use it and who it may suit. It is not scored.
What is MiC Plus?
The MiC Plus is a USB condenser microphone from Apogee. It works with Mac, Windows, iPhone and iPad and is presented for music production, voice recording and livestreaming. The Japanese distributor is Media Integration.
It combines the microphone, mic preamp and AD/DA converter in one body, using signal processing that Apogee calls PureDIGITAL. It records at 24-bit up to 96 kHz.
The microphone is a cardioid condenser. It has a built-in 46 dB mic preamp and a digitally controlled knob for input gain. The headphone output has a Blend function that lets you balance the mic input and playback with zero latency.
It is compact and designed to be used on the move. It is made in the USA and designed in California, and it was released in November 2017.
Cardioid condenser
A cardioid condenser with a newly developed capsule. It is said to capture a wide dynamic range, from soft vocals to drums.
46 dB mic preamp
A built-in preamp with a high-precision digital encoder knob controls input gain. There is no analog compression.
24-bit / 96 kHz
It converts to digital at up to 96 kHz / 24-bit using the processing Apogee calls PureDIGITAL.
Headphone output with Blend
The 3.5 mm stereo headphone output has Blend. You can balance mic input and software playback while listening with no delay.
Plug and play
No complicated setup is required; you can start recording once connected. It supports Mac, Windows 10, iPhone, iPad and iPod touch.
Cables and stands included
Lightning, USB Type-C and USB Type-A cables, a tabletop tripod stand and a mic stand adapter are included.
PureDIGITAL all-in-one design
The microphone, mic preamp and AD/DA converter are combined in one unit, with signal processing that Apogee calls PureDIGITAL. Digital audio goes straight to a computer or iOS device without a separate interface.
Blend control for monitoring
The 3.5 mm stereo headphone output has a Blend function that sets the balance between mic input and software playback. Monitoring is zero-latency, so you can hear your own voice without delay while singing or reading.
Three cables included
Lightning (iOS), USB Type-C and USB Type-A cables are included, so you can pick the one that matches the port on your device.
Tabletop tripod and stand adapter
A tabletop tripod stand and a mic stand adapter are included, so it can sit on a desk or be mounted on a regular mic stand.
Specifications
| Item | Details |
|---|---|
| Release | November 2017 |
| Pickup pattern | Cardioid |
| Resolution / sample rate | 24-bit, up to 96 kHz |
| Mic preamp | 46 dB |
| Input gain control | Digital encoder knob |
| Headphone output | 3.5 mm stereo with Blend |
| Analog compression | None |
| Compatibility | Mac, Windows 10, iPhone, iPad, iPod touch |
| Cables | Lightning (iOS), USB Type-C and USB Type-A cables included |
| Stands | Tabletop tripod and mic stand adapter included |
| Manufacturing | Made in the USA (parts sourced from the USA and abroad) |
What is included and system requirements
- Microphone
- Lightning (iOS) cable
- USB cable (Type-C)
- USB cable (Type-A)
- Tabletop tripod stand
- Mic stand adapter
- Quick start guide
How to use it
- Set it up with the tripod stand or the mic stand adapter.
- Connect with the cable that suits your device (USB Type-A, Type-C or Lightning).
- Set the input to MiC Plus in the computer's sound settings.
- Plug headphones into the 3.5 mm output.
- Adjust input gain with the knob on the body.
- Use Blend to balance the mic sound and playback.
- Make a test recording.
- On iPhone or iPad, record with a compatible recording app.
- In your recording software or iOS app, choose MiC Plus as the audio interface in the input device settings.
- Set input gain with the knob on the unit, then connect headphones and use Blend to check the balance between mic input and playback.
Singing and vocal recording
A cardioid condenser may suit recording voice.
Narration and podcasts
The maker lists voiceover, podcasts and interviews.
Livestreaming
USB connection may make it easy to use for streaming.
Recording on the go with iPhone or iPad
A Lightning cable is included, so it can be carried around.
On-the-go recording with iPhone or iPad
With a Lightning cable in the box, it may be convenient for capturing ideas or narration on an iOS device without hunting for extra cables. The compact body may also suit carrying around.
Desktop narration and streaming
The included tabletop tripod may let you start narration or livestreaming right on your desk, and Blend lets you hear playback while checking your own level.
Who it may suit
- People who want studio-style recording over USB
- People who also want to use it with iPhone or iPad
- People starting narration or streaming
Good to know before you buy
- There is no built-in analog compression (the related HypeMiC has it).
- Windows support is listed as Windows 10.
- The information is from the distributor page; the Apogee official page was not read this time.
- Windows support is listed for Windows 10.
- You need to select MiC Plus as the input device in your app.
How it differs from similar products
We do not pick a winner; the official figures are placed side by side.
Apogee HypeMiC
The MiC Plus has no built-in analog compression. The HypeMiC has the same capsule, 24-bit / up to 96 kHz and Blend, plus analog compression with three settings.
Price
Please check the official page for the price.
See MiC Plus on the product page
Sources: minet.jp (checked 2026-10-27)
Comments